基于正交匹配追踪的声层析方法   总被引：2，自引：0，他引：2  

李倩倩  史娟  李整林  罗宇  阳凡林  张凯 《海洋学报(英文版)》2019,38(11):149-157

声速剖面的变化会对声传播产生较大的影响，经验正交函数模型经常用来实现对声速剖面数据的简化描述。然而在内波、湍流等海水不均匀性存在时，这种正则化操作会造成声速重构精度的大幅降低。本文利用字典学习生成声速剖面的非正交原子，在稀疏编码时采用正交匹配追踪（OMP，Orthogonal Matching Pursuit）算法，更新字典则使用KSVD （Kernel Singular Value Decomposition）的字典更新算法。由于字典学习不需要强制使用正交条件，对于训练数据更加灵活，从而可以使用少数的原子组合达到更高的重构精度。利用一次浅海声学实验多次测量的声速剖面研究了海水声速剖面的经验正交函数表示和字典学习，研究表明：相比于正交函数表示，学习字典可以利用少数原子（甚至一个原子）更好的解释声速剖面扰动。字典学习可以提高声速剖面的稀疏性，从而提高声速剖面的反演精度。  相似文献   

基于稀疏表示的地面磁共振信号提取方法          下载免费PDF全文

王琦  田宝凤  张健  蒋川东 《地球物理学报》2018,61(8):3446-3456

在多孔隙含水层中地面磁共振（surface nuclear magnetic resonance，SNMR）信号呈现多弛豫衰减特性，常规盲源分离方法和单指数拟合方法引起信号严重失真和信息缺失等问题.本文提出了基于稀疏表示的随机噪声背景下多弛豫SNMR信号的提取方法.根据SNMR信号的衰减特征，设计了精确刻画SNMR信号且与随机噪声不相关的离散衰减余弦冗余字典.其次，针对多弛豫SNMR信号稀疏度未知的问题，通过设置合理的残差比阈值控制迭代次数，改进了广义正交匹配追踪（generalized orthogonal matching pursuit，gOMP）算法，使得该方法应用于SNMR信号的提取时，具有更好的自适应性和普适性.再次，鉴于SNMR测量数据为多次独立重复采集的结果，提出了基于数据流的SNMR信号提取策略，在提高算法鲁棒性的同时，保证了信号提取结果的唯一性.最后，通过仿真和实测数据证明了基于gOMP算法的稀疏表示方法可以显著地提升多弛豫SNMR信号的提取质量，降低随机噪声对含水层反演结果的影响，提高SNMR探测能力.  相似文献   

2017年四川九寨沟7.0级地震前地震应变场分析   总被引：2，自引：1，他引：1       下载免费PDF全文

罗国富  刘忠旺  丁凤和  马禾青  杨明芝 《地震工程学报》2018,40(6):1322-1330

以地震应变场作为地震活动的变量，通过自然正交函数展开方法，计算2017年8月8日四川九寨沟7.0级地震前的地震应变场，提取出震前时间因子的异常变化。计算结果发现应变场前4个时间因子在震前1~3年的中短期异常并不显著，只有第2个和第4个时间因子震前有小幅度的异常变化，分析其原因，时间因子可能受到2008年汶川8.0级地震和2013年岷县漳县6.6级地震前大幅度异常的影响。与时间因子对应的空间等值线形成局部应变高值异常危险区，可能是2013年岷县漳县6.6级地震和2017年九寨沟7.0级地震空间异常的中短期特征。再对比九寨沟7.0级地震前后与松潘-平武7.2级双震的空间异常随时间演变，分析异常发展变化模式的差异，最后应用地震资料的累积频次从物理角度解释异常形成的机制。  相似文献   

基于SPEI的渭河流域干旱时空变化特征分析          下载免费PDF全文

邹磊  余江游  夏军  王飞宇 《干旱区地理》2020,43(2):329-338

以标准化降水蒸散指数（SPEI）作为评估指标，基于渭河流域28个气象站点1961—2017年实测降水量和气温数据，采用Mann-Kendall（M-K）趋势检验、经验正交函数以及小波变换等方法分析渭河流域干旱时空变化特征，并研究渭河流域干旱与6种大尺度气候因子之间的相关关系，进一步探讨主要气候因子对流域干旱时空分布特征的潜在影响。研究表明：渭河流域在1961—2017年间整体呈现出变旱的趋势。通过经验正交函数分解，渭河流域干旱分布场主要有3种典型模态类型，分别为全局型、西北—东南反向分布型以及东—西反向分布型；同时，大尺度气候因子南方涛动指数SOI与流域干旱分布场具有更好的相关关系，对该区域内干旱变化有较强的影响。  相似文献   

Solution for a plane strain rough‐walled hydraulic fracture driven by turbulent fluid through impermeable rock          下载免费PDF全文

N. Zolfaghari  E. Dontsov  A. P. Bunger 《国际地质力学数值与分析法杂志》2018,42(4):587-617

The impact of turbulent flow on plane strain fluid‐driven crack propagation is an important but still poorly understood consideration in hydraulic fracture modeling. The changes that hydraulic fracturing has experienced over the past decade, especially in the area of fracturing fluids, have played a major role in the transition of the typical fluid regime from laminar to turbulent flow. Motivated by the increasing preponderance of high‐rate, water‐driven hydraulic fractures with high Reynolds number, we present a semianalytical solution for the propagation of a plane strain hydraulic fracture driven by a turbulent fluid in an impermeable formation. The formulation uses a power law relationship between the Darcy‐Weisbach friction factor and the scale of the fracture roughness, where one specific manifestation of this generalized friction factor is the classical Gauckler‐Manning‐Strickler approximation for turbulent flow in a rough‐walled channel. Conservation of mass, elasticity, and crack propagation are also solved simultaneously. We obtain a semianalytical solution using an orthogonal polynomial series. An approximate closed‐form solution is enabled by a choice of orthogonal polynomials embedding the near‐tip asymptotic behavior and thus giving very rapid convergence; a precise solution is obtained with 2 terms of the series. By comparison with numerical simulations, we show that the transition region between the laminar and turbulent regimes can be relatively small so that full solutions can often be well approximated by either a fully laminar or fully turbulent solution.  相似文献   

Polynomial chaos expansion and response surface method for nonlinear modelling of reference evapotranspiration     

Behrooz Keshtegar  Ozgur Kisi  Mohammad Zounemat-Kermani 《水文科学杂志》2019,64(6):720-730

The feasibility of polynomial chaos expansion (PCE) and response surface method (RSM) models is investigated for modelling reference evapotranspiration (ET₀). The modelling results of the proposed models are validated against the M5 model tree and multi-layer perceptron neural network (MLPNN) methods. Two meteorological stations, Isparta and Antalya, in the Mediterranean region of Turkey, are inspected. Various input combinations of daily air temperature, solar radiation, wind speed and relative humidity are constructed as input attributes for the ET₀. Generally, the modelling accuracy is increased by increasing the number of inputs. Including wind speed in the model inputs considerably increases their accuracy in modelling ET₀. Mean absolute error (MAE), root mean square error (RMSE), agreement index (d) and Nash-Sutcliffe efficiency (NSE) are used as comparison criteria. The PCE is the most accurate model in estimating daily ET₀, giving the lowest MAE (0.036 and 0.037 mm) and RMSE (0.047 and 0.050 mm) and the highest d (0.9998 and 0.9999) and NSE (0.9992 and 0.9996) with the four-input PCE models for Isparta and Antalya, respectively.  相似文献   

A sequential sparse polynomial chaos expansion using Bayesian regression for geotechnical reliability estimations     

Qiujing Pan  Xingru Qu  Leilei Liu  Daniel Dias 《国际地质力学数值与分析法杂志》2020,44(6):874-889

Polynomial chaos expansions (PCEs) have been widely employed to estimate failure probabilities in geotechnical engineering. However, PCEs suffer from two deficiencies: (a) PCE coefficients are solved by the least-square minimization method which easily causes overfitting issues; (b) building a high order PCE is often computationally expensive. In order to overcome the aforementioned drawbacks, the Bayesian regression technique is employed to evaluate PCE coefficients, which not only provides a sparse solution but also avoids overfitting. With the aid of the predictive means and variances given by Bayesian analysis, a learning function is proposed to sequentially select the most informative samples that are critical to build a PCE. This sequential learning scheme can highly enhance the computational efficiency of PCEs. Besides, importance sampling (IS) is incorporated into the sequential learning (SL)-PCEs to deal with geotechnical problems with small failure probabilities. The proposed method of SL-PCE-IS is applied to three illustrative examples, which shows that the improved PCE method is more effective and efficient than the common PCEs method, leading to accurate estimations of small failure probabilities using fewer training samples.  相似文献   

EC细网格对黔南州温度预报的订正研究          下载免费PDF全文

赵杰  陈波  莫乙冬  潘启学  顾欣 《中低纬山地气象》2022,46(1):79-85

该文采用EC细网格2 m温度预报场及国家站实况资料,通过滑动平均法、双权重滑动平均法、多项式拟合法以及最佳系数法对EC细网格2 m温度在黔南州的预报进行订正分析,结果显示:4种方法订正后最高气温7 d平均准确率分别提升了12.70%~17.84%,最低气温7 d平均准确率分别提升了1.14%~2.86%。对于高温预报,最佳系数法订正效果最优,其次是多项式拟合法,对于最低气温,前3 d采用滑动平均法订正效果最明显,第4 d开始则采用最佳系数法订正,订正效果更明显。4种订正方法均在7-9月效果最明显。黔南州西部及中部地区多项式拟合法订正效果更好,州东南部地区最佳系数法与滑动平均法订正效果更好,但在120 h时效后滑动平均法的订正效果明显下降,州北部地区最佳系数法订正效果更为明显。  相似文献   

同轴双向回转钻进破岩效率研究          下载免费PDF全文

曹彦伟  李谦 《探矿工程》2021,48(S1):70-78

国内外相关研究均显示同轴双向回转可有效降低钻具振动和提高破岩效率,但双向回转相对传统单向回转的钻进效率的提升水平研究较少。据此,本文建立双向回转钻头以及单向回转钻头与岩石相互作用的有限元模型,以破岩比功作为评价指标量化比较分析了2种钻头的破岩效率。通过定义双向钻头内外壁尺寸差、内外钻头的间隙、内钻头壁厚与双向钻头内外壁尺寸差之比、内外钻头转速比和内外钻头底部高度差5种核心参数,并设计正交试验完成了仿真分析。结果显示,内外钻头高度差与内外钻头间隙对于破岩比功影响比较小,内外钻头尺寸差、内外钻头转速比和内钻头壁厚与双向钻头内外尺寸差之比对破岩比功影响显著。  相似文献   

基于相干特征的岩石薄片序列图像边缘提取及颗粒分割     

周恒  张春雷  张欣  陈庆轩  张艳  仲诚诚 《吉林大学学报(地球科学版)》2021,51(6):1897-1907

针对岩石颗粒边缘模糊、结构复杂的特点,为了更有效地识别颗粒边缘,在基于特征值的C3相干算法的基础上,融合多尺度和多角度的特征表达,提出了一种改进的C3相干算法。该算法综合考虑岩石薄片图像角度域光学特征、空间尺度信息和各向异性信息,能更有效地表征颗粒边缘特征,表现出对复杂矿物结构的适应能力。在采集的岩石薄片正交偏光图像上验证提出的算法,实验结果表明,与原生C3相干算法相比,改进后的C3相干算法在全局图像上的方差和灰度差分乘积分别提升了68.41%和22.91%,信息熵下降了21.61%。  相似文献